All Camera Action; Camera List (Managing Cameras) - Lorex LNC201 User Manual

3.2.2 ALL CAMERA ACTION

Press to open the All Camera Action menu.
The All Camera Action Menu contains the following controls:
• Snapshot all: Take a snapshot from all connected cameras.
• Play all: Connect to all cameras selected in display grid.
• Pause all: Pause video for all connected cameras. Click Pause all again to resume
video.
• Disconnect all: Disconnect from all connected cameras.
• Clear all connection info: Remove all cameras from the display grid.

3.3 CAMERA LIST (MANAGING CAMERAS)

The Camera List is used to save connection information for your cameras, so you don't
have to re-enter the ID or password each time you connect. The Camera List also allows
you to configure certain camera settings.
Cameras connected to the Internet or local network are shown in blue in the camera list.
Cameras not connected are shown in red. If your camera is red, check the network
connection.
NOTE: Cameras may appear in red before you have connected to them the first time.
L-View 104 for PC
47