Editing Camera Wired Network Settings - Lorex LNC201 User Manual

Android™ App
2. Tap Alarm Notification.
3. Under Temperature, select ON to enable temperature push notifications.
4. Under Temperature unit, select °C or °F.
5. Under Higher bound, select the high temperature value. You will receive a
notification if the temperature near the camera goes above this value.
6. Under Lower bound, select the low temperature value. You will receive a notification
if the temperature near the camera goes above this value.
7. Tap Update to save your settings.

7.4.9 EDITING CAMERA WIRED NETWORK SETTINGS

Configure the camera IP address when connected using Ethernet. Select DHCP or Fixed
IP.
To edit camera wired network settings:
1. In Camera List, tap
2. Tap Camera Settings.
140
Enable temperature notifications
Select Celsius or Fahrenheit
Select high temperature for notifications
Select low temperature for notifications
next to the camera you would like to edit.