Editing Camera Mobile Streaming Settings - Lorex LNC201 User Manual

3. Under Temperature, select ON to enable temperature notifications.
4. Under Temperature unit, select F° or C°.
5. Under Higher bound, select the high temperature value. You will receive a
notification if the temperature near the camera goes above this value.
6. Under Lower bound, select the low temperature value. You will receive a notification
if the temperature near the camera goes above this value.
7. Tap Update to save your settings.

6.4.5 EDITING CAMERA MOBILE STREAMING SETTINGS

Configure the camera image quality settings for streaming to mobile devices (i.e. smart
phones and tablets). Please note that less bandwidth is generally available over mobile
networks than over WiFi or Ethernet.
To edit mobile streaming settings:
1. In Camera List, tap
2. Tap Stream Settings.
3. Under Bandwidth, select the bandwidth for your mobile connection. If you are mainly
connecting using WiFi, you may set this setting higher.
4. Under Auto, select ON to have the camera automatically select the resolution and
frame rate based on available bandwidth. Or, select OFF to manually select the
resolution and frame rate. If you select OFF, configure the following:
next to the camera.
Select Mobile Bandwidth
Enable/disable auto resolution and
frame rate adjustment
Select Resolution
Select Frame rate
Enable/disable audio streaming to
iPad®
iPad® App
113