Operating Your Fan And Remote Control - HAMPTON BAY SOUTHWIND 52371 Use And Care Manual

Assembly – Assembling the Fan Without the Light Kit
12
Assembling the fan without the
light
In order to use the fan without the light kit, remove the
switch cup cover from the top of the light kit tter
assembly (E) by removing the center hex nut inside the
switch cup cover, and then thread the switch cup cover
off of the threaded nipple on the top of the light kit tter
assembly (E). Remove three screws.
Press the plastic plug (FF) (provided) into the center hole
of the switch cup cover.
Align the three scew holes in the switch cup cover with
the three key slots in the switch cup. Make sure the
notch in the switch cup cover clears the reversing switch
in the switch cup.
Position the switch cup cover onto the switch cup and
install the three screws that were removed in rst step.
Turn the switch cup cover clockwise until it locks and
tighten the three screws.

Operating Your Fan and Remote Control

Remote Control - Your fan is equipped with a remote control to operate
the speed and lights of your new ceiling fan. For more information
on how to install the remote control, see the remote control instruction
along with the remote control components.
Speed setting for warm or cool weather depends on factor such as the
room size, ceiling height, number of fans and so on.
The fan shipped from the factory with the reversing switch positioned
to circulate air downward. If air ow is desired in the opposite direction,
turn your fan off and wait for the blades to stop turning, then slide the
reversing switch (located in switch cup) to opposite position, and turn
fan on again. The fan blades will turn in the opposite direction and
reverse air ow.
1. Speed - The remote features Low, Med, Hi and Off buttons to select
the desired speed of operation and turn the fan On or Off.
2. Light - To control the light kit, the remote features a Light/Dimmer
button.
NOTE: Wait for fan to stop before reversing the direction of
blade rotation.
Warm weather - (Forward) A downward air ow creates a cooling effect.
This allows you to set your air conditioner on a higher setting without
affecting your comfort.
Cool weather - (Reverse) An upward air ow moves warm air off the
ceiling. This allows you to set your heating unit on a lower setting
without affecting your comfort.
2 1