HAMPTON BAY SOUTHWIND 52371 Use And Care Manual page 10

Assembly – Attaching the Fan Blades
8
Attaching the blades to the blad
brackets
Attach a blade (F) to a blade bracket (G) by inserting
screws (AA) into the holes in the blade and through the
blade bracket. Note that the rubber washers are pre-
attached to the blade bracket.
Tighten each screw securely.
Repeat these steps for each blade (F) and blade bracket
(G).
AA
F
G
9
e Fastening the blade assemblies to
the motor
Fasten the blade assembly to the motor (D) by inserting the
alignment post into the slot on the bottom of the motor and
tightening the blade bracket (G) screws. The blade bracket
screws are pre-installed into the blade bracket (G).
Repeat this step for the remaining blade assemblies.
0 1
D
G