Advertisement

Owners &
Installation
LISTINGS
AND
CODE
APPROVALS
These gas appliances have been
tested in accordance with AG
103, NZS 5262 and have been
certified by the Australian Gas
Association for installation and
operation as described in these
Installation and Operating
Instructions.
Your unit should be serviced
annually by an authorised
service person.
Geneva /Ultimate
(Australia)
PLEASE KEEP THESE INSTRUCTIONS
FOR FUTURE REFERENCE
WARNING:
Improper installation, adjustment, altera-
tion, service or maintenance can cause
injury or property damage. Refer to this
manual. For assistance or additional infor-
mation consult an authorized installer, serv-
ice agency or the gas supplier.
FOR YOUR SAFETY
Do not store or use gasoline or other flam-
mable vapours and liquids in the vicinity of
this or any other appliance.
Installation and service must be performed
by an authorized installer, service agency or
the gas supplier.
Head Office - Australia
54 Boundary Rd. Braeside
P.O. Box 553
Mordialloc 3195
Ph. (03) 9586-7777
Fax. (03) 9586-2980
908-061
(New Zealand)
Models: F43-NG
F43-LP
F28-NG
F28-LP
FOR YOUR SAFETY
What to do if you smell gas:
! ! ! ! ! Do not try to light any ap-
pliance
! ! ! ! ! Do not touch any electri-
cal switch: do not use any
phone in your building.
! ! ! ! ! Immediately call your gas
supplier from a neigh-
bour's phone. Follow the
gas supplier's instruc-
tions.
! ! ! ! ! If you cannot reach your
gas supplier, call the fire
department.
Head Office - New Zealand
1-37 Mt Wellington Hwy.Panmure,
P.O. Box 14349
Auckland 6.
Ph. (9) 570-9009
Fax. (9) 527-1294
Natural Gas
Propane
Natural Gas
Propane
02/01/01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the F43-NG and is the answer not in the manual?

Questions and answers

Kerry
June 10, 2025

How to program a masport gas fireplace f43ng

Subscribe to Our Youtube Channel

Summary of Contents for Masport F43-NG

  • Page 1 Owners & Geneva /Ultimate Installation (Australia) (New Zealand) Models: F43-NG Natural Gas F43-LP Propane F28-NG Natural Gas F28-LP Propane PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE WARNING: FOR YOUR SAFETY Improper installation, adjustment, altera- What to do if you smell gas:...
  • Page 2 Masport Gas Series of hand crafted appliances has been designed to provide you with all the warmth and charm of a woodstove, at the flick of a switch. The models F43-NG, F43-LP, F28- NG, and F28-LP of this series has been approved by Australian Gas Association for both safety and efficiency.
  • Page 3: Table Of Contents

    Fan Maintenance - F43 ......21 Fan Maintenance - F28 ......22 Removing Valve ........23 Troubleshooting Guide ......25 Parts List - F43 ......... 26 Parts List - F28 ......... 29 Warranty Warranty ..........35 Masport F43/F28 Freestanding Gas Heater...
  • Page 4: Safety Label

    SAFETY LABEL DATA BADGE NOTE: Masport units are constantly being This is a copy of the label that accompanies each Masport F43 Freestanding Gas Heater. We have printed a copy of the improved. Check the label on the unit and if there is a contents here for your review.
  • Page 5: Installation

    The appliance shall be installed in accordance with the The Masport Freestanding Gas Heater can be installed in a manufacturer's installation instructions, local gas fitting wide variety of ways and will fit nearly any room layout. It may...
  • Page 6: Installation Checklist

    Fasten but do not penetrate the inner Final check, page 14. sleeve of the flue when tightening the screw. Before leaving this unit with the customer, the installer must ensure that the appliance is firing correctly and operation fully Masport F43/F28 Freestanding Gas Heater...
  • Page 7: Minimum Clearances To Combustibles

    E Side Wall to Unit 2" / 50 mm E Side Wall to Unit 2" / 50 mm F43-NG & F43-LP Reference Dimensions F43-NG & F43-LP Reference Dimensions F43-NG & F43-LP Reference Dimensions F43-NG & F43-LP Reference Dimensions F43-NG & F43-LP Reference Dimensions F28-NG &...
  • Page 8: Gas Connection

    1/2 psig (3.45 kPa). and maximum supply pressure see the System Data Table. The manifold pressure is controlled by a regulator built into System Data - F43-NG & F43-LP the gas control, and should be checked at the pressure test point.
  • Page 9: Log Installation - F43

    Place the left front log, carefully sliding it down onto the left pins of the front burner. See diagram 2. Place the right front log, carefully sliding it down onto the right pins of the front burner. See diagram 3. Diagram 4 Masport F43/F28 Freestanding Gas Heater...
  • Page 10: Log Installation - F28

    See diagram 1. Diagram 4 Diagram 1 Note: Do not force logs down. Place the left front log, carefully sliding it down onto the left pins of the front burner. See diagram 2. Diagram 2 Masport F43/F28 Freestanding Gas Heater...
  • Page 11: Door Installation And Door Latch

    Turn the latch catch in- ward or outward to loosen or tighten. Diagram 3 - F28 Diagram 2 - F28 Diagram 3 - F43 Masport F43/F28 Freestanding Gas Heater...
  • Page 12: Test For Flue Spillage

    The smoke should be drawn into the draft diverter. If the smoke is not drawn into the draft diverter, turn the unit off and check for the cause of lack of draft. Masport F43/F28 Freestanding Gas Heater...
  • Page 13: Wiring Diagram - F43

    INSTALLATION WIRING DIAGRAM - F43 WIRING DIAGRAM - F28 Masport F43/F28 Freestanding Gas Heater...
  • Page 14: Optional Wall Thermostat

    OPTIONAL REMOTE CONTROL INSTALLATION INSTALLATION A wall thermostat may be installed if desired. Use chart below Use the Masport Remote Control Kit (Part # 910-358/P) to determine thermostat wire length. approved for this unit. Use of other systems may void your warranty.
  • Page 15: Operating Instructions

    If you don't smell gas continue on to the next step. Turn the PILOT knob counterclockwise to pilot and align it with the arrow as shown in diagram 1. Masport F43/F28 Freestanding Gas Heater...
  • Page 16: Copy Of Lighting Plate Instructions

    1) Push in the gas control knob slightly and turn 2) Turn off all electric power to the appliance if clockwise to “OFF”. Do not force. service is to be performed. DO NOT REMOVE THIS INSTRUCTION PLATE 908-649 Masport F43/F28 Freestanding Gas Heater...
  • Page 17: Convection Fan Operation

    Note: If you have an incorrect flame pattern, contact your Masport dealer for further instructions. ADJUSTING FLAME HEIGHT Your heater has an adjustable flame to tailor the look and heat output to your specific needs.
  • Page 18: Aeration Adjustment

    F28-LP Propane 3/8" open Fan: Masport gas appliances use high tech fans to push heated air The aeration adjustment gears are located on the right side of farther into the room. It is not unusual for the fan to make a the burner box and can be accessed from the side or from the "whirring"...
  • Page 19: Maintenance

    ARE IN THE SAME ROOM AS THE APPLIANCE. CAUTION: ANY SAFETY SCREEN OR GUARD RE- MOVED FOR SERVICING AN APPLIANCE MUST BE REPLACED PRIOR TO OPERATING THE APPLIANCE. CLOTHING OR OTHER FLAMMABLE MATERIAL SHOULD NOT BE PLACED ON OR NEAR THE APPLI- Masport F43/F28 Freestanding Gas Heater...
  • Page 20: Glass Replacement

    Installing Glass: GLASS REPLACEMENT Install both center and side glass onto aluminium extru- Your Masport heater is supplied with high temperature, 5mm sions as per diagram. Neoceram silica coated ceramic glass that will withstand the highest heat that your unit will produce. In the event that you...
  • Page 21: Fan Maintenance - F43

    6 screws holding the access panel in place. Disconnect the molex plug. Remove the green ground wire from the fan body. Lift fan off of the 2 pins, tip back and pull through firebox opening. Masport F43/F28 Freestanding Gas Heater...
  • Page 22: Fan Maintenance - F28

    Replacing F28 Fan: Reverse the above steps (1 - 4). If necessary install a new gasket before replacing the fan access panel. Make sure the fan wires and the ground wire are reattached. Diagram 1 Masport F43/F28 Freestanding Gas Heater...
  • Page 23: Removing Valve

    See diagram below. Remove the two outside frame pieces by removing two screws per side. See diagram below. Masport F43/F28 Freestanding Gas Heater...
  • Page 24 Remove the burner by removing the four 1/4" hex head screws. See diagram below. Note: Use a magnetic type screwdriver. Carefully lift the burner tray assembly out. F43 Burner 10) To replace the burner tray assembly, simply reverse these instructions. F28 Burner Masport F43/F28 Freestanding Gas Heater...
  • Page 25: Troubleshooting Guide

    • Follow same steps for thermocouple. out. Note: For service technicians only . See the Masport Troubleshooting Guide for more detailed information. ABNORMAL OPERATION If the main burner does not light but pilot stays on shut down heater and contact your dealer...
  • Page 26: Parts List - F43

    WARRANTY THE MASPORT EXPRESS WARRANTY All new Masport Gas appliances are warranted, subject to the This Express Warranty Does Not Cover: following conditions, to be free from defects in material or Defects, malfunctions or failures caused by incorrect workmanship under normal use. The Express Warranty on all...

This manual is also suitable for:

F28-lpF43-lpF28-ngGenevaUltimate

Table of Contents