Table of Contents
Advertisement
TG8051_8061PD(e-hg).book Page 27 Wednesday, February 2, 2011 2:33 PM
*1 KX-TG8061
*2 If you program these settings using one of the handsets, you do not need to program the same item
using another handset.
*3 This menu is not displayed when scrolling through the display menus. It is only available in direct
command code.
*4 This feature allows the unit to automatically adjust the date and time each time caller information
including date and time is received.
To turn this feature on, select "Hívóazonosít". To turn this feature off, select "Manuális". (Caller ID
subscribers only)
To use this feature, set the date and time first (15. oldal).
*5 KX-TG8051
*6 Ringer volume cannot be turned off for alarm, intercom calls, and paging.
*7 If you select one of the melody ringer tones, the ringer tone continues to play for several seconds even
if the caller has already hung up. You may either hear a dial tone or no one on the line when you answer
the call.
*8 The preset melodies in this product are used with permission of © 2011 Copyrights Vision Inc.
*9 You can set the wallpaper to display with or without date and time by pressing Z. The default setting
is with date and time displayed.
*10You can set the handset display backlight while on charge.
– "BE": Backlight is on (dimmed).
– "KI": Backlight turns off after 10 seconds of charging.
*11 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any keys,
including confirmation tones and error tones.
*12If you subscribe to a Caller ID service and want to view the caller's information after lifting up the handset
to answer a call, turn off this feature.
*13The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if
necessary.
*14To prevent other users from joining your conversations with outside callers, turn this feature on.
Special programming
Alarm
An alarm sounds at the set time for 3 minutes once
or daily. Alarm can be set for each handset.
Fontos:
L Set the date and time beforehand (15. oldal).
1
1 (middle soft key) (72)
2
{r}: Select the desired alarm option. s M
"KI"
Turns alarm off. Go to step 6.
"Egyszer"
An alarm sounds once at the set time.
"Naponta"
An alarm sounds daily at the set time. Go to
step 4.
3
Enter the desired date and month. s M
4
Set the desired time. s M
Programming
5
{r}: Select the desired alarm tone. s M
L We recommend selecting a different ringer
tone from the one used for outside calls.
6
M s {ic}
L When the alarm is set, z is displayed.
Megjegyzés:
L To stop the alarm, press {ic} or place the
handset on the base unit or charger.
L When the handset is in use, the alarm will not
sound until the handset is in standby mode.
Night mode
Night mode allows you to select a period of time
during which the handset will not ring for outside
calls. This feature is useful for time periods when
you do not want to be disturbed, for example, while
sleeping. Night mode can be set for each handset.
Using the phonebook's category feature (21. oldal),
you can also select categories of callers whose
calls override night mode and ring the handset
(Caller ID subscribers only).
27
Advertisement
Table of Contents
