Table of Contents
Advertisement
TG8051_8061PD(e-hg).book Page 16 Wednesday, February 2, 2011 2:33 PM
Getting Started
Megjegyzés:
L The date and time may be incorrect after
a power failure. In this case, set the date and
time again.
Dialling mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is "Tone (DTMF)".
"Tone (DTMF)": For tone dial service.
"Impulzusos": For rotary/pulse dial service.
1
1 (middle soft key) (12)
2
{r}: Select the desired setting.
3
M s {ic}
One touch eco mode
When the handset is on the base unit, the base unit
transmission power is reduced up to 99.9% if only
one handset is registered.
Even when the handset is not on the base unit or
several handsets are registered, the base unit
transmission power in standby mode can be
reduced up to 90% by activating one touch eco
mode.
You can turn on/off one touch eco mode by just
pressing {ECO/R}. The default setting is
"Normál".
– When the one touch eco mode is on:
"Alacsony" is temporarily displayed and i
is shown on the handset display instead of w.
– When the one touch eco mode is off: "Normál"
is temporarily displayed and i goes off from
the handset display.
Megjegyzés:
L When there is another cordless phone nearby
and it is in use, the base unit transmission power
may not be reduced.
L Activating one touch eco mode reduces the
range of the base unit in standby mode.
L If you set the repeater mode to "BE" (30. oldal):
– One touch eco mode is cancelled.
– "Takarékos beállítás" is not shown in
the display menu (25. oldal).
16
Display mode
You can select to display either a single item or
multiple items on one screen at a time for the
following features:
– handset main menu icons in function menu
– menu list, recorded message list
list, caller list, and redial list
*1 KX-TG8061
Select the desired setting:
– "Több elem": Multiple entries/all menu icons
are shown on one screen at a time.
– "Egyetlen elem": An entry/a menu icon is
shown on one screen in large characters at
a time.
The default setting is "Több elem".
Using soft key (Temporarily switching the
display mode)
You can temporarily switch the display mode by
pressing a shown when viewing the lists or
selecting menu icons.
Programming the display mode
beforehand
1
1 (middle soft key) (192
2
{r}: Select the desired setting. s M s
{ic}
Megjegyzés:
L When in multiple items display mode, you can
move screens by pressing {>} or {<}, without
scrolling down or up through the list:
– Press {>} to go to the next screen.
– Press {<} to return to the previous screen.
L When in multiple items display mode, you can
switch the screen to confirm the detailed
information by pressing a.
*1
, phonebook
Advertisement
Table of Contents
