Table of Contents
Advertisement
TG8051_8061PD(e-hg).book Page 31 Wednesday, February 2, 2011 2:33 PM
Registering the DECT repeater (KX-A405)
to the base unit
Megjegyzés:
L Please use a repeater that has not yet been
registered to another unit. If the repeater is
registered to another unit, deregister it first,
referring to the Installation Guide for the DECT
repeater.
1
Base unit:
Proceed with the operation for your model.
■ KX-TG8051
Press and hold {x} for about 5 seconds.
(No registration tone)
■ KX-TG8061
Press and hold {x} for about 5 seconds,
until the registration tone sounds.
L The next step must be completed within 90
seconds.
2
DECT repeater:
Connect the AC adaptor, then wait until the &
indicator lights green.
3
Base unit:
To exit the registration mode, press {x}.
L The registration tone stops. (KX-TG8061)
Programming
31
Advertisement
Table of Contents
