Table of Contents
Advertisement
TG8051_8061PD(e-hg).book Page 32 Wednesday, February 2, 2011 2:33 PM
Caller ID Service
Using Caller ID service
Fontos:
L This unit is Caller ID compatible. To use Caller ID
features, you must subscribe to a Caller ID
service. Contact your service provider/telephone
company for details.
Caller ID features
When an outside call is being received, the caller's
phone number is displayed.
Caller information for the last 50 callers is logged in
the caller list from the most recent call to the oldest.
L If the unit cannot receive caller information, the
following is displayed:
– "Nincs szám": The caller dials from an area
which does not provide a Caller ID service.
– "Privát hívó": The caller requests not to
send caller information.
L If the unit is connected to a PBX system, caller
information may not be properly received.
Contact your PBX supplier.
Missed calls
If a call is not answered, the unit treats it as
a missed call and y is displayed. This lets you
know if you should view the caller list to see who
called while you were away.
Even if only one missed call in the caller list is
viewed (32. oldal), y disappears from the display.
When you receive another new call, y is displayed
again.
Megjegyzés:
L Even when there are unviewed missed calls, y
disappears from the standby display if the
following operation is performed by one of the
registered handsets:
– Being replaced on the base unit or charger.
– Pressing {ic}.
32
Phonebook name display
When caller information is received and it matches
a phone number stored in the phonebook, the
stored name in the phonebook is displayed and
logged in the caller list.
Category ringer tone
This feature can help you identify who is calling by
using different ringer tones for different categories
of callers. When adding an entry to the phonebook,
you can assign it to the desired category (21. oldal).
When a call is received from a caller assigned to
a category, the ringer you selected for that category
rings after caller information is displayed.
If you select "Alapért. csengőhang", the unit
uses the ringer tone you selected on 25. oldal when
calls from this category are received. The default
setting is "Alapért. csengőhang".
1
n (left soft key) s 1
2
{r}: "Kategória" s M
3
{r}: Select the desired category. s M
4
{r}: Select the current setting of the category
ringer tone. s M
5
{r}: Select the desired ringer tone. s M
6
{ic}
Caller list
Fontos:
L Only 1 person can access the caller list at a time.
L Make sure the unit's date and time setting is
correct (15. oldal).
Viewing the caller list and calling
back
1
{<} (y)
2
Press {V} to search from the most recent call,
or press {^} to search from the oldest call.
L You can see the detailed information about
the caller by pressing a when in multiple
display mode.
3
To call back, press {C}.
To exit, press {ic}.
Megjegyzés:
L If the entry has already been viewed or
answered, "Q" is displayed, even if it was viewed
or answered using another handset.
Advertisement
Table of Contents
