Table of Contents
Advertisement
TG8051_8061PD(e-hg).book Page 17 Wednesday, February 2, 2011 2:33 PM
Making calls
1
Lift the handset and dial the phone number.
L To correct a digit, press ^.
2
Press {C} or ].
3
When you finish talking, press {ic} or place
the handset on the base unit or charger.
Using the speakerphone
1
Dial the phone number and press {s}.
L Speak alternately with the other party.
2
When you finish talking, press {ic}.
Megjegyzés:
L For best performance, use the speakerphone in
a quiet environment.
L To switch back to the receiver, press {s}/{C}.
Adjusting the receiver or speaker volume
Press {^} or {V} repeatedly while talking.
Making a call using the redial list
The last 10 phone numbers dialled are stored in the
redial list (each 24 digits max.).
1
j (right soft key) or {>} (R)
2
{r}: Select the desired phone number.
3
{C}
Erasing a number in the redial list
1
j (right soft key) or {>} (R)
2
{r}: Select the desired phone number. s
W
3
{r}: "IGEN" s M s {ic}
Pause (for PBX/long distance service
users)
A pause is sometimes required when making calls
using a PBX or long distance service. When storing
a calling card access number and/or PIN in the
phonebook, a pause is also needed (22. oldal).
Példa: If you need to dial the line access number
"0" when making outside calls with a PBX:
1
) s l
2
Dial the phone number. s {C}
Megjegyzés:
L A 3 second pause is inserted each time l is
pressed. Repeat as needed to create longer
pauses.
Making/Answering Calls
Answering calls
When a call is being received, the ringer indicator
flashes rapidly.
1
Lift the handset and press {C} or {s} when
the unit rings.
L You can also answer the call by pressing
any dial key from ) to 9, *, or (. (Any
key answer feature)
2
When you finish talking, press {ic} or place
the handset on the base unit or charger.
Auto talk
You can answer calls simply by lifting the handset
off the base unit or charger. You do not need to
press {C}. To turn this feature on, see 26. oldal.
Adjusting the handset ringer volume
■ While the handset is ringing for an incoming
call:
Press {^} or {V} repeatedly to select the desired
volume.
■ Programming the volume beforehand:
1
1 (middle soft key) (16)
2
{r}: Select the desired volume.
3
M s {ic}
Temporary handset ringer off
While the handset is ringing for a call, you can turn
the ringer off temporarily by pressing L.
Useful features during a call
Hold
This feature allows you to put an outside call on
hold.
1
Press 1 during an outside call.
2
{r}: "Tartás" s M
3
To release hold, press {C}.
L Another handset user can take the call by
pressing {C}.
Megjegyzés:
L If a call is kept on hold for more than 9 minutes,
an alarm tone starts to sound and the ringer
indicator flashes rapidly. After 1 additional
minute on hold, the call is disconnected.
L If another phone is connected to the same line,
you can also take the call by lifting its handset.
17
Advertisement
Table of Contents
