Special Programming - Panasonic KX-TGB212E Operating Instructions Manual

TGB21xE(en).book Page 19 Wednesday, April 9, 2014 11:53 AM

Special programming

Alarm
An alarm sounds at the set time (once or daily)
for 2 minutes. You can also customise the
repeat times and the repeat cycle (snooze
function). Alarm can be set for each handset.
Example: If you want the alarm to sound 3
times, repeating at 5 minute intervals from
7:00, you need to set the alarm as follows;
Time: "07:00"
"Repeat Times": "3 Times"
"Repeat Cycle": "5 Minutes"
Important:
L Set the date and time beforehand (page
13).
1
{j/OK}
2
{r}: "Set Time" s {j/OK}
3
{r}: "Alarm" s {j/OK}
4
{r}: "Alarm Mode" s {j/OK}
5
{r}: Select the desired alarm option. s
{j/OK}
"Off"
Turns alarm off. Go to step 15.
"Once"
An alarm sounds once at the set time.
"Daily"
An alarm sounds daily at the set time.
6
Set the desired time. s {j/OK}
7
{r}: "Repeat Times" s {j/OK}
8
{r}: Select the desired setting. s
{j/OK}
L If you only want the alarm to sound 1
time, select "Off" and go to step 11.
9
{r}: "Repeat Cycle" s {j/OK}
10
{r}: Select the desired setting. s
{j/OK}
11
{r}: "Ringtone" s {j/OK}
12
{r}: Select the desired alarm tone. s
{j/OK}
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
Programming
L We recommend selecting a different
ringer tone from the one used for
outside calls.
13
{r}: "Volume" s {j/OK}
14
{r}: Select the desired volume. s
{j/OK}
15
{m}
Note:
L Press {m} to stop the alarm completely.
L Press any dial key from z to 9, *, or y
to stop the sound but keep the set time
and/or the snooze function activated.
L When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
19