Table of Contents
Advertisement
Programming
*7
If you select one of the melody ringer tones, it will continue to play for several seconds even
if the caller has already hung up. You may either hear a dial tone or no one on the line when
you answer the call.
*8
The preset melodies in this product are used with permission of © 2009 Copyrights Vision
Inc.
*9
This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select "Caller ID auto". To turn this feature off, select
"Manual". (Caller ID subscribers only)
To use this feature, set the date and time first (page 17).
*10 This tone lets you know when you receive an outside call while you are on another line or an
intercom call. If you select "On", the tone sounds 2 times.
*11 This setting is available when you have the key finder (KX-TGA20AZ). Read the installation
guide for more information on the key finder.
*12 For models with supplied key finders, the display shows "1: Finder1".
*13 If you register 2 or more key finders.
*14 If you have 2 or more key finders.
*15 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
*16 If you subscribe to a Caller ID service and want to view the caller's information after lifting up
the handset to answer a call, turn off this feature.
*17 The recall time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
You can access your service provider/telephone company "call waiting" service by having
the recall time set at "100 ms", and then follow your service provider/telephone company
"call waiting" instructions to operate this service. (for Australia)
*18 The default setting will be as follows if you select the following regional code when changing
the unit's region setting (page 45):
"Newzealand" = "600 ms"
*19 Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to "A" if telephone line condition is not good.
*20 This setting is available when a cellular phone is paired.
*21 This setting is available when a headset is paired.
Special programming
Alarm
An alarm sounds at the set time for 3 minutes
once or daily. Alarm can be set for each
handset.
Important:
R Set the date and time beforehand
(page 17).
42
Handset
1
MMENUN#720
2
MbN: Select the desired alarm option. a
MSELECTN
"Off"
Turns alarm off. Go to
step 7.
"Once"
An alarm sounds once at
the set time.
"Daily"
An alarm sounds daily at
the set time. Go to step 4.
Advertisement
Table of Contents
