Station Speed Dialing
Station Speed Dialing lets you assign frequently used dialing
sequences (extensions, outside numbers, or feature access
codes) to each of ten single-digit codes (0 through 9). You can
then dial a single-digit code instead of the entire sequence. On
Version 6.3 and higher, you can also be set up at the
communications server for up to 30 codes, in groups of 10. If
you are set up for more than ten, they follow a double-digit
scheme (00 through 29).
To set up a station speed code on a display phone,
1.
PROGRAM
2.
SPEED
3.
4.
5.
PROGRAM
To set up a station speed code on a non-display
phone,
1.
SPEED
2.
3.
Press the Program key.
Press the Station Speed (SPEED) key, or dial # # 3.
Enter the station speed code.
After NEW NUMBER? is displayed, enter the
dialing sequence.
Press the Program key.
Press the Station Speed (SPEED) key
SPEED
twice, or get a dial tone and dial # # 3.
Enter the station speed code.
Enter the dialing sequence. Then hang up.
19