How To Change The Display Presets; How To Enter Cameo Mode; How To Display Sequencing; How To Return To The Default Sequence List - GE Security SymDec 16 plus 4 User Manual

How to change the display presets

1. Press and hold the Display button on the front panel.
2. The Display Preset screen will appear.
3. Select from the ten displayed options by pressing the corresponding camera button.The selected screen
replaces the factory default display.

How to enter Cameo mode

A cameo is defined as any cell in a multiscreen display.
1. From any multiscreen display, use the arrow buttons to move the selection box to a selected display
and press enter.
2. Press the IP or Analog button followed by a camera number button.

How to display Sequencing

The sequencing feature allows a camera to be displayed briefly on-screen, before advancing to the next camera
in the sequence list. The default sequence list displays each camera in numerical order.
From Full Screen
1. Press any camera number to enter fullscreen mode.
2. Press the Sequence button to begin automatic sequencing.
From Multiscreen
1. While in a multiscreen display, use the arrow buttons to move the selection box to the camera you wish
to display sequencing and press enter.
2. Press the Sequence button to begin automatic sequencing in that cameo.

How to return to the default sequence list

1. Press and hold the Display button to reset all screens to the default.
2. Select number nine to return to the default screen list.

How to enter Playback mode

From Multiscreen
1. In multiscreen mode, move the selection box to the desired camera and press enter.
2. Press play. The selected camera is now in playback.
Chapter 3 25
Basic Operations