Symnav; Minimum System Requirements; Installing Symnav Software From Cd-Rom; Starting Symnav Software - GE Security SymDec 16 plus 4 User Manual

88 SymDec 16 plus 4
User Manual

SymNav

SymNav software provides remote video viewing and SymDec 16 menu setup with your PC. Make sure all
connections are completed, at a minimum the power cord, a viewing monitor, and an Ethernet cable must be
connected from the SYmDec 16 plus 4 and your PC.

Minimum System Requirements

The following minimum system requirements must be met before software installation.
Windows® 2000/XP and Direct X are registered trademarks of Microsoft Corporation.
Table 41. SymNav minimum system requirements
Hardware
CPU
RAM
Hard disk drive
Monitor
Video
Operating system

Installing SymNav software from CD-ROM

To install software on your hard disk from a CD:
1. Place the SymNav software CD in the CD-ROM drive of a PC that meets the minimum system
requirements.
2. Follow the instructions for installation as they appear.
3.
Note: If Autorun is not enabled on your PC, choose Run from the Start Menu, then type d:\setup.exe (where "d" is the drive
letter of your CD-ROM) and click OK. Follow the instructions as they appear on your screen.

Starting SymNav software

To start the SymNav software, double-click on the SymNav software desktop icon
from the Start menu and then select SymNav software. The Main window of the SymNav software program
will appear. For operating details, please see the SymNav software manual.
Note: The SymNav manual in pdf format is located on the SymNav software CD.
Specification
Pentium 2.8 GHz or faster
512 MB
50 MB free hard drive space
SVGA, 1024 X 768, 24 bit color
AGP or PCI Express, 128 MB DDR Memory
Direct X Version 9 or higher
Windows® 2000 SP4, XP SP2
or choose Programs