GE Security SymDec 16 plus 4 User Manual page 53

Recording
Use this menu to select the camera type, recording input, IP address, and record mode of the IP camera or
video stream. You can also use this menu to enable or disable the covert feature of the IP camera selected.
These options vary according to the camera type selected.
Figure 21. The IP Camera/Recording menu
Table 18. Cameras/Recording options
Menu Setting
Camera Type
Record Input
Username
Password
Streaming
Source/IP Address
Video Port
Stream Port
HTTP Port
RTSP Port
Record Mode
Covert
Options
SymProtcol, ACTi 2.0, GE CamPlus
Live, Disable, Live + Record
Press enter to launch virtual keypad to input username (not available for SymProtocol)
Press enter to launch virtual keypad to input password (not available for SymProtocol)
TCP Only, RTP (UDP) (not available for SymProtocol)
IP address of selected camera
6001 (not available for SymProtocol)
6002 (not available for SymProtocol)
80 (not available for SymProtocol)
7070 (not available for SymProtocol)
Always, Alarm only, Event + Alarm
Enable or disable. Covert means the camera is recording but the display is turned off.
Chapter 4
Programming the SymDec 16 plus 4
43