Glass Touch Panel - GE Profile PHB925SB1SS Technical Service Manual

Glass Touch Panel

To remove the glass touch panel:
1. Remove the main logic board. (See
Board.)
2. Remove the 1/4-in. hex-head screw that
attaches the control panel ground wire.
3. Place the control panel in the service position.
(See .)
Control Panel
4. Remove the four 1/4-in. hex-head screws that
attach the touch panel brackets to the control
panel frame.
5. Disconnect the left and right touch panel ribbon
connectors from the glass touch panel.
6. Lift glass touch panel from control panel frame.
Ribbon Connector
Glass Touch Panel Removed
Main Logic
Ribbon Connector
– 48 –