Cleaning The Glass Cooktop - GE PB900 Owner's Manual

Cleaning the Glass Cooktop

Normal Daily Use Cleaning
For models with Precision Cooktop Sensor on the
left front element: ONLY use water and dish detergent
based cleaners. Cleaners that have grit can cause build
up around sensor and restrict its ability to move freely.
To maintain and protect the surface of your glass
cooktop, follow these steps:
1. Before using the cooktop for the first time, clean it
with ceramic cooktop cleaner. This helps protect the
top and makes cleanup easier.
2. Regular use of ceramic cooktop cleaner will help keep
the cooktop looking new.
3. Shake the cleaning cream well. Apply a few drops of
a ceramic cooktop cleaner directly to the cooktop.
Burned-On Residue
NOTE:
use scrub pads other than those recommended.
For models with Precision Cooktop Sensor on the
left front element: ONLY use non-scratch pads to clean
to the sensor surface may occur if you use scrub pads
that are abrasive.
1. Allow the cooktop to cool.
2. Spread a few drops of ceramic cooktop cleaner on
the entire burned residue area.
ceramic cooktops, rub the residue area, applying
pressure as needed.
Heavy, Burned-On Residue
For models with Precision Cooktop Sensor on the
left front element: ONLY use non-scratch pads to clean
to the sensor surface may occur if you use scrub pads
that are abrasive.
1. Allow the cooktop to cool.
a 45° angle against the glass surface and scrape the
soil. It will be necessary to apply pressure to the razor
scraper in order to remove the residue.
3. After scraping with the razor scraper, spread a few
drops of ceramic cooktop cleaner on the entire burned
remove any remaining residue.
49-2001277 Rev. 0
for Ceramic Cooktops to clean the entire cooktop
surface.
residue. No need to rinse.
NOTE:
cooktop until it has been cleaned thoroughly.
4. If any residue remains, repeat the steps listed above
as needed.
5. For additional protection, after all residue has been
removed, polish the entire surface with ceramic
cooktop cleaner and a paper towel.
Ceramic Cooktops.
4. For additional protection, after all residue has been
removed, polish the entire surface with ceramic
cooktop cleaner and a paper towel.
The ceramic cooktop scraper and all recommended supplies
are available through our Parts Center. See the Accessories
and Consumer Support sections at the end of this manual.
NOTE:
For cleaning videos and
instructions, scan the QR
code with your device.
21