FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 DIS/REASSEMBLY, ADJUSTMENT
98.04.13
1151D036AA
1139D172AA
1139D173AA
3. Go to the rear of the copier and unplug the connec-
tor of Image Erase Lamp.
4. Remove the Imaging Unit.
5. Remove one screw and the Image Erase Lamp.
NOTE
When removing the Erase Lamp, use care not to lose
the pressure spring in the rear.
6. Using a brush or a soft cloth dampened with alco-
hol, clean the Erase Lamp.
NOTE
After the Erase Lamp has been cleaned, make the
"Adjustment of the Image Erase Lamp Position." See
p. D-68.
D-36