Minolta EP1054 Service Manual page 28

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 DIS/REASSEMBLY, ADJUSTMENT
98.04.13
1139D103AA
1139D104AA
1139D105AA
1139D106AA
1139D107AA
12. Remove four screws and the Separator Guide
Plate Unit.
NOTE
When reinstalling the Separator Guide Plate Unit,
press the parts shown on the left up against the copier
frame (both at front and rear).
13. Remove two screws and the Lever.
14. Snap off one C-clip and remove the Separator Unit.
NOTE
• Please use tweezers when reinstalling the C-clip.
15. Snap off one C-clip and remove the Separator Roll
Assy.
D-17