Minolta EP1054 Service Manual page 35

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 DIS/REASSEMBLY, ADJUSTMENT
98.04.13
(15/18 cpm copier)
• Remove the Original Cover, Original Scales, and Original Glass.
• Remove the Middle Right, Upper Right, Right, Upper Left, and Upper Rear Covers.
• Remove the Left and Right Hinge Covers, Rear Upper Cover (Small), and Rear Upper
Cover.
1139D128AA
1139D129AA
1139D130AA
1151D032AA
1139D132AA
1. Align the Scanner with the rectangular hole in the
upper copier frame and remove the screw from the
Scanner Fixing Bracket.
2. Remove the Fixing Bracket.
3. Unhook the spring to remove the shorter length of
the Cable.
4. Move the 2nd/3rd Mirrors Carriage toward the
Scanner Drive Gear so that the cable slacks off
and then remove the longer length of the Cable.
5. Remove four screws and PWB-A.
6. Remove three screws and the Scanner Motor
Mounting Bracket.
7. Snap off one E-ring and remove the Scanner Drive
Gear.
8. Remove two screws and the Pulley.
9. Remove the Cable.
D-24