Ptz Control And Color Setup; Cable Connection - Honeywell HSVR-16 User Manual

Figure 4-26 Searching Results and Backup Menu (fig error)
The file name format usually is: SN_CH+channel number+time Y+M+D+H+M+S. In
the file name, the YDM format is the same as you set in general interface (Main
Menu Setting General). The file extension name is ".dav". You can visit our
website to view listed CD-ROM brand.
Tips:
During the backup process, you can click ESC to exit current interface for other
operation. The system will not terminate backup process.

PTZ Control and Color Setup

Cable Connection

Please follow the procedures below to go on cable connection
•
•
•
34
When you click Stop during the burning process, the stop
function becomes activated immediately. For example, if
Note there are ten files, when you click Stop, the system just
backup five files, system only save the previous 5 files in the
device (But you can view ten file names).
The operations described here are mainly based on
Note PELCO-D protocol for Honeywell HSPT-120 speed dome.
For other protocols, there might be a little difference.
Connect the dome RS485 port to DVR 485 port.
Connect dome video output cable to DVR video input port.
Connect power adapter to the dome.
Honeywell