•
Automatic: Channel recording follows the set in recording schedule setup
(Main Menu Setting Schedule)
•
Closed: the channel stops recording.
Figure 4-5 Recording Control Menu
Enable/disable recording in specified channels
Please check current channel status: "○" means it is not in recording status, "●"
means it is in recording status.
You can use mouse or direction key to highlight channel number. See
Figure 4-6 Different Status of Manual Record
Enable/disable recording in all channels
Highlight ○ below All, you can enable all channel recording.
•
Automatic recording in all channels
Highlight "ALL" after "Automatic". See
When system is in automatic recording, all channels will be recorded as you
set in Main menu Setting Schedule.
The corresponding indication light in front panel will turn on.
Figure 4-7 Automatic Recording in All Channels
Figure
4-7.
Honeywell
Figure
4-6.
21