•
•
•
After completing all the settings, click Save, and the system goes back to the
previous menu.
Figure 5-7 The RS232 Setup Menu
Network
Here is for you to input network information. See
•
•
•
•
•
•
•
•
After completing all the settings, click Save, and the system goes back to the
previous menu.
46
Data bit:8
Stop bit:1
Parity: None
IP address: Here you can input IP address.
DHCP: It is to auto search IP. When enable DHCP function, you can not modify
IP/Subnet mask /Gateway. These values are from DHCP function. If you have
not enabled DHCP function, IP/Subnet mask/Gateway display as zero. You
need to disable DHCP function to view current IP information. Besides, when
PPPoE is operating, you can not modify IP/Subnet mask /Gateway.
TCP port: Default value is 37777.
UDP port: Default value is 37778.
HTTP port: Default value is 80.
Max connection: system support maximal 10 users. 0 means there is no
connection limit.
Transfer mode: Here you can select the priority between fluency/video qualities.
Network download: System can process the downloaded data first if you enable
this function.
Honeywell
Figure
5-8.