Honeywell HSVR-16 User Manual page 102

Figure 6-41 The PTZ Setup Menu
Please refer to the following sheet for detailed information.
Default & Backup
Default: Restore the factory default settings. You can select corresponding items.
Backup: Export current configuration to local PC or import configuration from
current PC.
Please refer to
Please note that the system cannot restore some information such as network IP
address.
94
Parameter Function
Channel You can select monitor channel from the dropdown list. .
Protocol Select the corresponding dome protocol.(such as PELCOD)
Set corresponding dome address. Default value is 1. Please note your setup here
shall comply with your dome address; otherwise you can not control the speed
Address
dome.
Baud Rate Select the dome baud rate. Default setup is 9600.
Data Bit Default setup is 8. Please set according to the speed dome dial switch setup.
Stop bit Default setup is 1. Please set according to the speed dome dial switch setup.
Parity Default setup is none. Please set according to the speed dome dial switch setup.
You can click save button after you complete setup for one channel, or you can
Save
complete the whole setups and then click save button.
Refresh Click this button to get device latest configuration information.
Figure 6-42.
Honeywell