Logout; Auto Resume After Power Failure; Replace Button Battery - Honeywell HD-DVR-1004 User Manual

Logout

Auto Resume after Power Failure

Replace Button Battery

There are two ways for you to log out.
One is from menu option:
In the main menu, click the shut down button, and you can see an interface
as shown below. See
Figure 4-3 Logout Menu
You have several options. See
Figure 4-4 Options for Logout
The other way is to press the power button on the front panel for at least 3
seconds, causing the system to stop all operations. Then you can click the
power button in the rear panel to turn off the DVR.
The system can automatically backup video and resume its previous
working status after power failure.
Please make sure to use the same battery model if possible.
We recommend regular battery replacement (such as one-year) to
guarantee system time accuracy.
Figure 4-3.
Figure 4-4.
Honeywell
27