Loading Paper Into Bypass Tray - Ricoh SP C250DN Operating Instructions Manual

2. Loading Paper
5. Follow Steps 3 to 7 in "Loading Paper into Tray1 and 2".
• To reinsert the extender, you might have to push it with moderate force.

Loading Paper into Bypass Tray

• Before printing on paper other than envelopes, make sure to pull up the levers on the machine rear,
inside the rear cover.
• Load paper with the print side down and in the short-edge feed direction.
• Do not load paper while the machine is printing.
• Curled paper may jam. Straighten curled paper before loading.
• Duplex printing is not possible.
• Tray 1 and 2 are unavailable if paper is loaded in the bypass tray.
• You cannot load paper into the bypass tray while the machine is in Energy Saver mode.
1. Insert the top edge of the paper into the machine.
58
DAC056
DAC067