Maintenance Menu - Ricoh SP C250DN Operating Instructions Manual

4. Configuring the Machine Using the Control Panel

Maintenance Menu

This section explains about parameters that can be set on the Maintenance menu.
Color Dens/Reg
Adjusts color density and registration automatically.
TonerAlmstEmpty
Specifies the low toner level notification timing.
Default: [Normal]
• Normal
Low toner level notification will be made when the number of pages that can be printed with
the remaining toner is approximately 200.
• Notify Later
Low toner level notification will be made when the number of pages that can be printed with
the remaining toner is approximately 100.
• Notify Sooner
Low toner level notification will be made when the number of pages that can be printed with
the remaining toner is approximately 300.
Anti-Humid Lvl
You can set the printer to produce prints in consistent quality even when humidity is high.
Default: [Off]
• Off
• Level 1
Select this mode if printouts are blurred.
• Level 2
Select this mode if printouts are curled and/or blurred. Note that if you select this mode, the
first print takes longer than subsequent prints.
• Level 3
Select this mode if printouts are still curled and/or blurred even when prints are made in
[Level 2]. Note that this mode requires more time to produce the first print than [Level 2].
88