Ricoh SP C250DN Operating Instructions Manual page 175

Message
Move Env. Lever
Cover Open
Controller FW Download failed
Incorrect Tnr: #
Load Paper #
Memory Overflow
Explanation
The fusing unit levers are not
positioned correctly.
The top or front cover is open.
Controller FW could not be
downloaded.
Irregular toner # (Black,
Magenta, Cyan or Yellow) is
set.
The indicated tray # (1, 2,
bypass) is out of paper.
This error occurs when FW
memory is not enough to save
the printing page.
Error & Status Messages on the Control Panel
Recommended Action
When printing on an envelope,
check that the left and right
levers have been lowered to the
envelope mark.
When printing on paper, check
that the left and right levers have
been raised to the plain paper
mark.
Open and then close the top or
front cover.
Turn off the main power, turn it
back on, and then download
the controller FW again.
If the download fails again,
contact your sales or service
representative.
Replace the toner to an
appropriate one. See
page 129 "Replacing the Print
Cartridge".
If the error message appears
even though the toner cartridge
is attached correctly, use a dry
cloth to wipe the part of the
toner cartridge that is in contact
with the machine.
Load paper into the indicated
paper tray.
See page 54 "Loading Paper".
Reduce the size of the data, and
then try the operation again.
173