Ricoh SP C250DN Operating Instructions Manual page 58

2. Loading Paper
Slide the guides inward until they are flush against the paper's sides.
Make sure the paper is not stacked higher than the projection on the side paper guides.
When using Tray 2, make sure the paper is not stacked higher than the upper limit marked inside
the tray.
6. Check there are no gaps between the paper and the paper guides (both side and end
paper guides).
7. Carefully push the paper tray straight into the machine.
To avoid paper jams, make sure the tray is securely inserted.
• The upper limit differs depending on the paper type (thin or thick paper). See the label inside the
tray to check the upper limit.
• The remaining paper indicator on the right front side of the paper tray shows approximately how
much paper is remaining.
Extending Tray 1 to load paper
This section explains how to load paper longer than A4 (297 mm) into the machine.
56
DAC059
DAC058