Ricoh SP C250DN Operating Instructions Manual page 112

5. Configuring the Machine Using Web Image Monitor
Bypass Tray Setting Priority
Item
Bypass Tray Setting
Priority
• The information about Tray 2 appears only when it is installed.
110
Select how print jobs using the bypass tray are handled.
• System Settings
The paper settings configured on the machine's control panel are
applied to all print jobs. An error occurs when the paper settings
specified by the printer driver or the print command do not match the
machine's settings.
• Driver/Command
When executing a print job specifying the paper tray, the paper
settings specified in the printer driver or in the print command are
applied regardless of the machine's settings.
• Any Size/Type
Printing proceeds even if the paper size/type settings of the machine
and printer driver do not match, but if the paper is too small for the
print job, the printed image will be cropped.
• Any Custom Size/Type
The machine prints custom size print jobs according to the printer
driver's settings and prints standard size print jobs according to the
machine's settings.
For custom size print jobs, printing proceeds even if the paper size/
type settings of the machine and printer driver do not match, but if the
paper is too small for the print job, the printed image will be cropped.
For standard size print jobs, an error will occur if the paper size/type
settings of the machine and printer driver do not match.
Description