Table of Contents
Advertisement
Sound Alarm during Pre-alarm
You also have the option to sound the alarm in the software during a pre-alarm scenario, not
just for a standard alarm.
Once you have configured your alarms, you may return to the Device Setup tab or click one of
the Setup buttons at the bottom of the tab.
5.16.
Alarm Notifications Setup
Once you have completed the logger alarm setup, you can configure DataSuite to send alarm
notifications via Email or SMS.
From the Tools menu select one of the following options, depending on the type of notifications
required:
Email Alarm Notification
SMS Alarm Notification
Or click the Email
notification dialog.
Note: To enable sending of Email or SMS first define the Email and SMS settings in the Tools
> Options dialog. Connect a GSM modem to the PC if sending SMS's. Refer to section 5 .7 on
page 44 for more details.
You may manage your contact list of alarm notification recipients from either the Manage
Contacts menu item in the Tools menu, or from within the Alarm Notification dialog itself.
Figure 33: Alarm Notifications Setup dialog
As the Email and SMS Alarm Notifications must be defined separately, they each have separate
dialogs. However the interface is identical and the contacts are stored in the same database.
or SMS
icons located in the upper toolbar in order to launch the
65
Advertisement
Table of Contents
