Table of Contents
Advertisement
5.3.
System Password
Throughout the software you will be required to enter a password to perform certain functions
such as calibration or firmware update.
Note: The default password is 1234.
To change the password:
1. In the Password dialog box, click Change Password to open the Change Password
dialog box.
2. Enter the current password in the Current Password text box.
3. Enter the new password in the New Password text box.
4. Enter the new password a second time in the Confirm New Password text box to confirm
your new password.
5. Click OK.
Note: The password must include at least 4 characters and is case sensitive.
5.4.
DataSuite Software Layout
This section provides an overview of the default DataSuite window view as well as a guide to all
of the icons available throughout the software.
The most commonly used tools and commands are displayed on two toolbars. Tools that relate
to all aspects of the program are located in the main (upper) toolbar. Tools specific to the
graphs are located on the graph (lower) toolbar.
Refer to section 5 .4.5 for a description of these toolbars.
As the DataSuite platform supports several Omega products, the interface is common for most
of their functionality. There are several areas such as logger configuration, where the interface
differs. These differences will be detailed throughout the chapter.
5.4.1.
Map View
When DataSuite is first launched and the device detection window closes, the default window
that is opened is the Map View (see screenshot below).
This view is used to monitor the status and data of all OM-DAQLINK devices currently detected
by the software.
You can also switch to Map View at any time by clicking the Map View button
toolbar. In addition, the Map View can be printed.
Icons are used to represent each of the Omega devices, and using the mouse the user can
select specific actions to be performed on the unit.
Name tags can also be displayed for each OM-DAQLINK icon on the Map View.
33
in the main
Advertisement
Table of Contents
