Table of Contents
Advertisement
5.5.7.
Print Map View
Prints the current Map View with all unit icons, including their network paths and name tags.
5.5.8.
Exit
Exits the DataSuite application.
5.6.
Tools Menu Items
5.6.1.
Define Sensor
DataSuite enables the user to define custom sensors. This is a useful tool for when the data
logger is communicating with many sensor types from different vendors.
Any additional sensor that you would like to connect to the logger must comply with the
following restrictions:
The sensor's output must be either voltage in the range of 0 to 1 V, 0 to 50 mV, current in the
range of 4 to 20 mA or Pulse in the range of 0 to 65535 pulses.
1. Click Tools > Define New Sensor and the Define New Sensor dialog will open.
Figure 23: Define New Sensor dialog
2. Click New to enable the fields.
3. Select the Base sensor from the drop-down menu (depending on whether your sensor's
output is 0 to 1 V, 0 to 50 mV, 4 to 20mA, or measuring pulses).
4. Enter the sensor name and sensor unit.
42
Advertisement
Table of Contents
