Table of Contents
Advertisement
Status Menu
Status
The Status menu contains the following sub menus, all reachable by using the Scroll button.
The sub menus are outlined below in the order in which they appear on the logger display.
Name and Status
As explained previously, the unit name (or Comment) is displayed on the first row and the
second row indicates the logger status.
If the logger is running, then the following screen is displayed.
Omega DAQLINK
Logger running
Batt Level (battery level)
If the power adapter is not connected the battery percentage will be displayed.
If the power adapter is connected External power will be displayed.
Batt Level:
67%
Logger Version
This menu informs the user of the logger firmware version. This is helpful when you need to
upgrade the system firmware, to check the current version. Or when contacting Omega
technical support, with any technical issues.
Logger version:
2.03.00.02.38.00
s
The firmware version is commonly referred to by the numbers in bold in the screen above.
S/N
This menu displays the unit's eight digit SN.
S/N 12345678
Memory Mode
There are two possible device modes:
Stop when full – when the logger memory is full the logger will stop logging.
Batt Level:
External power
22
Advertisement
Table of Contents
