Software Registration Process - Omega OM-DAQLINK-TEMP User Manual

If you have replaced your computer and must reinstall DataSuite using the same serial
number, contact Omega Customer Support for assistance.
 Registration can be performed from the computer with DataSuite installed, or if there is no
Internet connection from that computer, then via another computer with Internet connectivity.
5.2.1.

Software Registration Process

Note: The software registration forms are all case sensitive. Incorrect entry will result in invalid
registration.
To register any one of the DataSuite modules, follow the instructions below:
1. Locate the DataSuite module serial number (SN). The SN label is found on the DataSuite
box as well as on the software CD case.
Note: If you cannot locate your serial number, contact Omega Customer Support directly.
2. Launch DataSuite. The registration wizard will open.
3. To open the registration wizard from within DataSuite go to Help > Register.
4. From the bottom of the wizard Home screen, select one of the module buttons to proceed to
the registration screen for that module.
5. Three choices are presented. Select the relevant option and click Next to proceed:
30