Canon VIXIA HF M30 Quick Manual page 550

 The message "Not enough disk space for the workspace." is displayed.

The following free space is required in the workspace to create a disc. Increase the free space in the
workspace, or change the workspace in the Preferences (P.147).
DVD/AVCHD List : at least three times the volume of data to be written on the disc
Blu-ray List : at least twice the volume of data to be written on the disc
DataDisc List : at least the size of data to be written on the disc

The message "Data is too large to write to." is displayed.
 Decrease the total volume of the files to write on a disc. The capacity of the disc varies depending on
the disc type. Also, note that you may not be able to write on a disc if the total volume of the files is
close to the disc capacity.
DVD-R, DVD-RW : 4.7GB
DVD-R DL : 8.5GB
BD-R, BD-RE : 25GB
BD-R DL, BD-RE DL : 50GB
 Disc writing fails when using a rewritable disc after erasing the recorded data.
 Disc creation may fail if the data on a rewritable disc has been erased using software other than
ImageMixer 3. When using a rewritable disc which has already been recorded, insert the disc as it is
and erase the recorded data using the writing options of ImageMixer 3.
 I want to change the menu title and the names of titles on the disc.
 You should enter the menu title and title names before writing a disc.
Right-click the Writing List and select [Edit (the name of the List that you selected)...] to change the
menu title.
Refer to P.62 for changing titles.
158