Installing Photo Application - Canon VIXIA HF M30 Quick Manual

Installing Photo Application

Be sure to install Photo Application before connecting the camcorder to the
computer.
You must have authorization as a Computer System Administrator to install
programs.
Your digital video camcorder is equipped with the standard Picture Transfer
Protocol (PTP). This protocol enables you to download still images by simply
connecting the camcorder to a computer with the USB cable (applications such
as the [Scanner and Camera Wizard] start automatically).
However, note that there are several limitations to downloading still images
with this method. To avoid these, install ZoomBrowser EX to download still
images.
It may take a few minutes, after connecting the camcorder, until you can
download still images.
Still images protected on the camcorder may lose this setting once they are
downloaded to the computer.
1
Check that the camcorder is not connected to the computer.
While a camcorder is connected to the computer, the software cannot be
installed normally. If a camcorder is connected, detach the USB cable from the
computer.
2
Set the
Manual/Photo Applications Ver. 34/Music Data Disc
/
computer's CD-ROM drive.
• Windows 7 / Windows Vista:
When the [AutoPlay] window appears, select [Open folder to view files] to
open the folder, and then double-click [setup.exe]. Follow the instructions in
the [User Account Control] window that appears after a brief period.
If the [AutoPlay] window does not open automatically, use the following
procedures to display it.
1) Select [Computer] from the Start menu.
2) Right-click the CD-ROM icon and select [Open] from the displayed
3) Double-click the [setup.exe] icon.
4) Follow the instructions in the [User Account Control] window that
20
Installing Photo Application
/ / /
Photo Applications Ver. 34/Music Data Disc in the
menu.
appears.
/ / / Instruction
/