Canon VIXIA HF M30 Quick Manual page 231

Buffer overflow. Recording was stopped.
- The data transfer rate was too high for the memory card in use and the recording was
stopped. Replace the memory card with one rated Speed Class 2, 4, 6 or 10.
- After repeatedly recording, deleting and editing scenes (fragmented memory), it will take
longer to write data on the memory and recording may stop. Save your recordings and initial-
ize the memory.
Built-in memory error
- The built-in memory could not be read. Contact a Canon Service Center.
Built-in memory is full
- The built-in memory is full ("f End" appears on the screen). Delete some recordings
(0 56, 102) to free some space. Save your recordings (0 128) and initialize the built-in
memory (0 40).
Cannot access the built-in memory
- There is a problem with the built-in memory. Contact a Canon Service Center.
Cannot communicate with the battery pack. Continue using this battery pack?
- You attached a battery pack that is not recommended by Canon for use with this camcorder.
- If you are using a battery pack recommended by Canon for use with this camcorder, there
may be a problem with the camcorder or battery pack. Consult a Canon Service Center.
Cannot convert
- Cannot access the memory card. Check the memory card and make sure it is inserted cor-
rectly.
- You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card
(0 36).
- There was an error creating the file name. Set 8
initialize the memory card or delete all the photos (0 102) and all the scenes in the [For Web
Upload] and [For DVD Burning] index screens (0 56).
Cannot copy
- The total size of the scenes you selected to copy exceeds the available space on the memory
card. Delete some recordings on the memory card (0 56, 102) or reduce the number of
scenes to copy.
- The memory card already contains the maximum number of scenes (3,999 scenes). Delete
some scenes (0 56) to free some space.
Cannot divide the scene. Initialize only using the camcorder.
- The scene could not be divided because the camcorder's internal scene management data log
is full. Save your recordings (0 126) and initialize the memory (0 40). Write back the
backup files and try dividing the scene again.
Cannot edit
- Could not move a scene in the playlist. Delete some scenes from the playlist (0 95).
Š
176
Additional Information
8
[Photo Numbering] to [Reset] and