Canon VIXIA HF M30 Quick Manual page 200

IMPORTANT
• While the camcorder is connected to the computer, do not open the
memory card slot cover and do not remove the memory card.
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
- Do not disconnect the USB cable.
- Do not disconnect the compact power adapter or turn off the
camcorder or the computer.
Uploading your Videos Wirelessly
If you are using an Eye-Fi card, you can automatically upload the mov-
ies from the [For Web Upload] index screen to your favorite video shar-
ing Web site. You will need to have installed the software supplied with
your Eye-Fi card and completed all the required configuration setup in
advance. Refer to the instruction manual of the Eye-Fi card.
Please read the IMPORTANT section (
card.
1 Insert your Eye-Fi card into the camcorder and make sure there is
sufficient available space on the memory card.
2 Convert the desired movies (0 142).
• When the conversion is completed, touch [End Without Connecting].
• If you are within the range of a configured network, Web upload will
start automatically.
• The status of the wireless communication is shown by the Eye-Fi
icon as follows:
- g (grayed out) Communication not established
- g (white, flashing) Connecting; g (white, continuously on)
Wireless upload on standby
- g (animated) Wireless upload in progress
- i [Eye-Fi Communication] is set to [B Off]
- h Wireless upload stopped by the camcorder (
- o Error reading from the Eye-Fi card (
0
146) before using an Eye-Fi
0
0
172)
External Connections
173)
Š
145