Exit Imagemixer 3 - Canon VIXIA HF M30 Quick Manual

Exit ImageMixer 3

Exit ImageMixer 3 and disconnect the camcorder. Observe the proper order to disconnect the camcorder.
Exiting ImageMixer 3
Click or
Close all dialog boxes and setting screens before exiting.
Disconnecting the camcorder
Click or on the lower right screen.
Click the article of the camcorder.
Windows XP/Windows Vista
Click [Safely remove Mass Storage Device -Drive(X:)].
The letter that appears as "(X:)" varies depending on the computer.
*
If multiple choices are displayed, select the drive corresponding to
*
the camcorder.
Windows 7
Click [Eject CANON(X:)].
The letter that appears as "(X:)" varies depending on the computer.
*
If two or more "CANON(X:)" are displayed, click all "CANON(X:)".
*
A message informing you that it is safe to remove hardware will be
displayed.
Disconnect the USB cable from the camcorder and
computer.
on the upper right screen.


If the camcorder is disconnected from
the computer while using ImageMixer
3, video files in the camcorder may
be damaged. Always follow the
instructions when disconnecting the
camcorder from the computer.
16
: Windows XP
: Windows Vista/Windows 7
: Windows XP
: Windows Vista/Windows 7