Part Names And Functions; Front View; Rear View - Roland CAMM-1 PNC-950 User Manual

3 PART NAMES AND FUNCTIONS

• Front View

Movable Pinch Roller
(Left)
This presses the media against
the grit roller. When loading a
sheet, place the left roller
inside the left edge of the sheet
to correctly track the material
through the machine.
Grit Roller
Grasps and moves the sheet
during cutting.
Platen
The sheet is moved over the
platen during the cutting process.
Movable Pinch Roller (Right)
This presses the media against the grit roller.
When loading a sheet, place the right roller
inside the right edge of the sheet to correctly
track the material through the machine.

• Rear View

Sheet Loading Lever
Used to raise or lower the pinch
rollers when loading or unloading a
sheet.
Tool Carriage
The tool carriage is where the
blade holder (or pen) is mounted.
The tool carriage performs the
cutting by moving the tool left/
right or up/down.
DIP Switches
Used to make various settings.
Serial (RS-232C) Input
Connector
In a serial configuration, this
connector is where you need to
connect the serial cable that is
used to communicate with your
computer.
Parallel (Centronics) Input Connector
In a parallel configuration, this connector is
where you need to connect the parallel cable in
order to communicate with your computer.
Pen Force Control Slider
Sets the blade force to be used with the tool.
Operation Panel
Power Switch
ON when switched to [I].
OFF when switched to [O].
Power Connector (AC IN)
This connector accepts standard AC
power cord.
3