Manual Eo - Denon AVR-1908 Owner's Manual

ENGLISH
[Selectable items]
• Set this to "ON" if the sound from the front speakers seems
distorted.
• When not using the center speaker or surround speakers. the
playback sound is down-mixed and output from the front speakers.
"Base Curve Copy" is displayed after the auto setup procedure has
been performed.
Base Curve Copy
Adjust CH
Copy the Room EO's "Audyssey Flat" correction curve.
[Selectable items]
va .' . '
110'
Manual EO
Select the speaker and frequency band and adjust the level.
[Selectable items] 63Hz 125Hz
251Hz
!iIIItz 1kHz
2kHz 4kHz 8kHz 16kHz
Select speaker adjustment method.
[Selectable items]
Each CH :
Adjust tonal quality for each speaker separately.
"lJR
CH,
I:
Adjust tonal quality for each LlR speaker pair.
ALL,CH :
Adjust tonal quality for all speakers together.
• The auto surround mode function lets you store in the memory the
surround mode last used for playing the four types of input signals
listed below.
CD
Analog and PCM 2-channel signals
<1l
Dolby Digital and DTS 2-channel signals
®
Dolby Digital and DTS multi-channel signals
®
Multi-channel signals other than Dolby Digital and DTS (PCM.
etc.)
• When playing in the PURE DIRECT mode. the surround mode does
not change even if the input signal is changed.
[Selectable items]
I
Ott
~
I:
Memorize settings. Most recently stored surround mode is
automatically selected.
"OfF' :
Do not memorize settings. Surround mode does not change
according to input signal.
Compression is used. Select this if sound from front
speakers is distorted.
Do not use compression. This is the recommended setting.
~:
1~1:
(")
o
" "
' "
~
o'
"
'"
:D
' "
3
o
..
C"l
o
~
2.
--,
•
Resets the settings to the default values.
:;l
o
c:
e;-
m
'"
: r
o
2
5'
'"
[Variable range]
Default
-20dB- +&IB
27