Other Operations; Convenient Functions ·46; Channel Level - Denon AVR-1908 Owner's Manual

ENGLISH
("l
o
:>
:>
I
~
I
g'
1-"'-
I
~
I
~
I
!
- The fader function does not affect the subwoofer.
- The fader can be adjusted until the volume of the speaker adjusted
to the lowest value is -12 dB.
1
Press
<ENTER>
or
[CH SELECn.
3
Use
<ll>
to adjust the volume of the speakers.
(<l:
front,
1>:
rear)
2
Press 1:::,.
\l,
<ENTER>
or
[Cif SELECn
to select
"Fader".
• To cancel, press <ZONEZ/ REC SELECT>, then turn <SOURCE SELECT>
until "ZONE2 SOURCE" is displayed.
• Make a test recording before starting the actual recording.
• Sources selected with the REC OUT mode are output from ZONE2
as well.
• In the REC OUT mode, the remote control unit's ZONE2 mode
buttons cannot be operated.
• The "XM" digital audio output signals are not output from the
OPTICAL2 output connectors.
• The source selected for MAIN ZONE is output from the digital output
connector (OPTICAL 2!-
The source selected in the REC SELECT mode is not associated with
the output from the digital output connector (OPTICAL 2).
-N'U.
- Digital signals are not output from the analog REC OUT connector.
• Recordings you make are for your personal enjoyment and should
not be used for other purposes without permission of the copyright
holder.
-Input sources for which "Delete" is selected at "Source Delete"
cannot be selected.
•
1
Press
<ZONE2/ REC SELECT>.
"ZONE2 SOURCE" is shown on the display.
ZONE2 SOURCE --- ZONE2 TUNER --- ... --- ZONE2 XM
+ +
RECOUT XM --- ...... --- RECOUT TUNER --- RECOUT SOURCE
Other Operations
2
Thm
<SOURCE SELECT>
until "RECOUT SOURCE"
is displayed.
The
"lila"
indicator lights.
3 Thm
<SOURCE SELECT>
to choose the input source
to be recorded.
4
Play the program source.
For operating instructions, refer to the respective equipment's
operating instructions.
To record FM or AM broadcasts, select the broadcast (@"page
42!-
5 Start recording.
For operating instructions, refer to the respective equipment's
operating instructions.
Convenient Functions
Channel Level
You can adjust the channel level either according to the playback
sources
OJ
to suit your taste, as described below.
1
Press
<ENTER>
or
[CH SELECn.
Channel Volume
•
•
SR
O. OdB
O. OdB
SBR
O. OdB
FR
O. OdB
SBL
O. OdB
SW
O. OdB
SL
O. OdB
Fader
FRONT~ :~REAR
s:
c:
2=:
N
o
:>
<D
2 Use 1:::,.
\l,
<ENTER>
or
[CH SELECn
to select the
speaker.
The speaker that can be set switches each time one of the
buttons is pressed.
3
Use
<ll>
to adjust the volume.
*
"OFF" can be set by pressing
<l
when the subwoofer's volume is
set to -12 dB.
46