Denon AVR-1908 Owner's Manual page 27

ENGLISH
Make detail settings for various parameters.
•
[Selectable items]
LFE :
Play low range and LFE signal of channels set to
"Small':
LFE+Main :
Play low range and LFE signal of all channels.
_t:ifiwQGfer£$8tup' .
:..:::.~,~ ..$; "
',7'.
\5'{ ... ' , ' : - i
SelectloW range signal to be reproduced by subwoofer.
II
Distance
Set distance from listening position to speakers.
Before making the settings, measure the distance {romtne
listening position to the different speakers.
• This can be set when menu "Speaker Configuration" - "Subwoofer"
is set to "Yes':
• Play music or a movie source and select the mode offering the
strongest bass.
• Select "LFE+Main" if you want the bass signals to always be
produced from the subwoofer.
Select unit for distance.
Feet I Meters
Small
I
None
i)
1spkr )
[Selectable items] ( Large
( 2spkrs
Large :Select this when using large speakers with ample low
frequency reproduction capabilities.
Small
:Select this when using small speakers without ample low
frequency reproduction capabilities.
None :Select this when no speaker is connected.
-N·U.
By default. the AVR-1908's "Amp Assign" setting is set to "ZONE2':To
use as the surround back speaker for the main zone, change the "Amp
Assign" setting (D3Fpage 28)
Ves
:Select this when a subwoofer is connected.
No
:Select this when no subwoofer is connected.
Surround Speaker
Select surround back speaker use and size.
Select surround speakers use and size.
[Selectable items] Large
I
Small
I
None
Surround Back Speaker
2. Manua I Se t up
IT!. Speaker Setup
2. HDMI Setup
3.AudioSetup
4. Zone2 Setup
5.0ption Setup
1. Auto Setup
IT2. Manua I Se t up
3.lnput Setup
4. Parameter
5. Information
Manual Setup
o
Speaker Configuration
Select speaker configuration and size.
(bass reproduction capability)
Speaker Setup
Use this procedure to set the speakers manually or if you wish to
change the settings made with the au:o setup procedure.
• Menu screen.
MENU
Front Speaker
Select front speaker size.
[Selectable items]
I
Large
I
Small
Center Speaker
Select center speaker use and size.
[Selectable items] Large
I
Small
I
None
Subwoofer
Select subwoofer use.
[Selectable items]
~
1;4".
2spkrs 1spkr :
Select the number of surround back speakers.
• Select "Large" or "Small" not according to the physical size of the
speaker but according to the low frequency reproduction capabilities
based on the frequency set at "Crossover Frequency" (D3Fpage
25).
• When "Front Speaker" is set to "Small': "Subwoofer" is automatically
set to "Yes ':
• If "Subwoofer" is set to "No': "Front Speaker" is automatically set to
"Large':
• If "Surround Speaker" is set to" None': "Surround Back Speaker" are
automatically set to "None':
• When using just one surround back speaker, connect it to the left
channel (SBL).
Step
Select step. (smallest distance)
[Selectable items]
[!!!]
O.1ft :
Can be selected when "Feet" is set.
I
O.1m I O.01m :
Can be selected when "Meters" is set.
Default
Resets the settings to the default values.
24