Denon AVR-1908 Owner's Manual page 69

ENGLISH
[Audio]
Symptom
Cause Countenneasure Page
No sound is
• You
are playing a monaural • The mode is set to something 34
produced from source (TV, AM radio broadcast, other than "STANDARD':
center speaker. etc.) in the STANDARD mode.
No sound
• The surround mode is set to • Set to a surround playback 35
is produced "STEREO': "DIRECT" or "PURE
mode.
from surround DIRECT'.'
speakers.
No sound is • The surround back speaker's • Check the setting and change it
29
produced from power amplifier is assigned to a as necessary.
surround back different channel.
speaker. • Surround back speaker setting is • Set to something other than
24
set to "None'.' "None':
• Surround mode not set to a mode • Select a surround playback 35
for 6.1- or 7.1-channel playback. mode.
No sound is • Subwoofer's power not turned • Turn on the subwoofer's power. -
produced from
on.
subwoofer.
• The
"Subwoofer"
setting at • Set to "Yes': 24
"Speaker Configuration" is set to
"No'.'
• The subwoofer is not properly • Check the connections. 9
connected.
• The
subwoofer's volume is • Adjust the subwoofer's volume 46
turned off.
to an appropriate level.
No test tones are
• Surround
mode not
set to • Set to the STANDARD mode. 34
produced when "STANDARD':
main remote
control unit's TEST
button is pressed.
DTS sound is not • DVD player's audio output setting • Set the DVD player. For details, -
output.
is not set to bitstream. refer to the DVD player's
operating instructions.
• DVD player is not compatible • Use a DTS-compatible player. -
with DTS sound playback.
• The AVR-1908's "Input Mode" • Set to the "Auto" or "OTS"
32
setting is set to "peM'.'
mode.
HDMI audio • The "Manual Setup" - "HDMI • Set to "AMP'.'
25
signals are not Setup" - "HDMI Audio Out"
output from setting is set to "TV'.'
speakers.
Symptom
Cause
Countenneasure Page
No sound is • The "Manual Setup" - "HOMI • Set to "TV': 25
output from Setup
"
- "HOMI Audio Out"
the monitor setting is set to "AMP'.'
connected
with HDMI
connections.
(Video]
Symptom Cause Countenneasure Page
No picture ·The connections between the • Check the connections.
11 - 17
appears. AVR-1908 and monitor are faulty.
• The monitor's input setting is • Set properly.
-
wrong.
• PURE DIRECT mode is set. • Cancel the PURE DIRECT mode. 35
• The player is connected using the • High definition (1080i/720p) and -
component input connectors, the progressive (480p/576pl video
monitor is connected using the signals are not down-converted.
video (yellow) or S-Video output Set the player to interlace
connectors. (480i/576i) signals.
No picture
• The connections to the HOM I • Check the connections.
11
appears connectors are faulty.
with HOM I
• HOM I input setting is improper. • Check the HOMI input setting. 32
connections.
• The monitor is not compatible • Connect a
monitor that is 11
with copyright protection compatible with copyright
(HOCP) protection (HOCP).
• The HOMI format of the player • Match the HOMI format of the
11
and monitor do not match. player and monitor.
Picture cannot be • Input source does not match • The video conversion function 14
recorded. recorder's video connection does not work for the REC
connector (video or S-Video). OUT connectors. Match the
input source and recorder
connections.
OVDs cannot be
• This is not a malfunction. Most
-
copied on a VCR. movie software includes copy
-
prevention signals and cannot be
copied.
66
s
~
N
C
::l
' "