Cisco 6921 Administration Manual page 93

Chapter
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description
Distinctive ring Users can customize how their phone indicates an
incoming call and a new voice mail message.
Divert Allows a user to transfer a ringing, connected, or
held call directly to a voice-messaging system.
When a call is diverted, the line becomes available
to make or receive new calls.
Do Not Disturb (DND) When DND is turned on, either no audible rings
occur during the ringing-in state of a call, or no
audible or visual notifications of any type occur.
You can configure the phone to have a
phone-button template with DND as one of the
selected features.
The following DND-related parameters are
configurable in Cisco Unified Communications
Manager Administration:
EnergyWise Enables an IP Phone to sleep (power down) and
wake (power up) at predetermined times, to
promote energy savings.
Fast Dial Service Allows a user to enter a Fast Dial code to place a
call. Fast Dial codes can be assigned to phone
numbers or Personal Address Book entries. (See
"Services" in this table.)
Forced authorization Controls the types of calls that certain users can
codes (FAC) place.
(SCCP phones only
Group call pickup Allows a user to answer a call that is ringing on a
directory number in another group.
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24567-01
• Do Not Disturb—This check box allows you
to enable DND on a per-phone basis. Use
Cisco Unified Communications Manager
Administration > Device > Phone > Phone
Configuration.
DND Incoming Call Alert—Choose the type
•
of alert to play, if any, on a phone for incoming
calls when DND is active. This parameter is
located on both the Common Phone Profile
page and the Phone configuration page (Phone
Configuration window value takes
precedence).
BLF Status Depicts DND—Enables DND
•
status to override busy/idle state.
Telephony Features Available for the Cisco Unified IP Phone
Configuration Reference
For more information, see the Cisco Unified
Communications Manager Features and
Services Guide, Call Pickup.
For more information, see the Cisco
Unified Communications Manager Features
and Services Guide, Immediate
For more information, see the Cisco Unified
Communications Manager Features and
Services Guide, Do Not Disturb.
For more information, see
EnergyWise on the Cisco Unified
IP Phone 6921, 6941, 6945, and 6961,
page 5-28.
For more information, see
Button Template for Personal Address Book or
Speed Dials, page 5-19.
For more information, see the Cisco
Unified Communications Manager Features
and Services Guide, Client Matter Codes and
Forced Authorization Codes.
For more information, see the Cisco Unified
Communications Manager Features and
Services Guide, Call Pickup.
Divert.
Enabling
Modifying a Phone
5-9