Disk Temperature - EverFocus ENVR8304D-8CH User Manual

ENVR8304D-8CH

6.3.4.2 Disk Temperature

Figure 6-20
Log: Check the box to record alarm events to log data.
Buzzer: Check the box to enable buzzer when System / Hard Disk's (HD) temperature is over
the "Temp. Warning Limit".
Email Notify: Check the box to send email notification when system / Hard Disk's (HD)
temperature is over the "Temp. Warning Limit". Email operation requires valid email
entered in the Email setup menu (see 6.6.2 Email).
Network Alarm: Check the box to send out a network alarm to a client PC. This feature
works with EverFocus' CMS software. You will need to configure the Alarm Server for the
NVR to send network alarms to the client PC (see 6.6.5 Alarm Server).
Stop Recording: Check box to stop recording when System / HD's temperature is over the
"Temp. Warning Limit".
Temp. Warning Limit: Sets the trigger temperature for System / HD Temperature event
actions. Choose between 45°C /113°F and 70°C /158°F.
Alarm Output: Select an alarm output number. When an alarm is triggered, the signal will
be transmitted through the selected alarm output relay.
Output Type: Output action will be Transparent and cannot be changed (alarm output
remains as long as the alarm condition is active).
77