Table of Contents
Advertisement
You need to set up the POS settings before searching the video with POS transaction data.
Please follow the steps below:
1.
Connect the POS system to the RS-232 port at the rear panel of the NVR.
2.
Make sure the RS-232 settings of the NVR are the same as those of the POS system.
Select the Text Insert in the Type drop-down list. (OSD Root Menu > Configuration >
System Setting > I/O control).
Figure 5-14
3.
Check the Text Insert box in the Monitor OSD setting page to display the transaction
data on the screen (OSD Root Menu > Configuration > Display > Monitor OSD).
4.
The transaction data, such as date, time, item, price and any customized information,
synchronized with the surveillance video will be displayed on the screen, shown as
the image below.
Figure 5-15
Figure 5-16
52
ENVR8304D-8CH
Advertisement
Table of Contents
